HP XP P9500 Storage - Manual (Page 64)

Parameter Settings Parameters Window Names
Optional RS232C Error Information Outflow
Mode Controller Option
ON Write and verify mode
Standard Mode Host Connection Mode 1 Host Connection Mode
HISUP Mode (do not specify any other parameter). Host Connection Mode 2
Identifying the 9500 V model using the serial number
You can identify the storage system model from the serial number displayed in the Vendor / Model
/ Serial Number column in the External Storage System tab.
The following table shows the relationship between the number in the Serial Number column and
the storage system model.
Model Displayed Serial Number
9570V, 9520V D600XXXX
9530V D60JXXXX
9580V, 9585V D60HXXXX
Note: In serial numbers, "X" is an arbitrary number or character.
Identifying the controller using the port WWN
You can identify the controller (controller 0 or controller 1) from the WWN of the port.
The following table describes the relationship between the port WWN and the controller.
WWN of Port Controller Model
XXXXXXXXXXXXXXX0 Controller 0 9570V
XXXXXXXXXXXXXXX1 9530V
9520V
XXXXXXXXXXXXXXX2 Controller 1
XXXXXXXXXXXXXXX3
XXXXXXXXXXXXXXX0 Controller 0 9580V
XXXXXXXXXXXXXXX1 9585V
XXXXXXXXXXXXXXX2
XXXXXXXXXXXXXXX3
XXXXXXXXXXXXXXX4 Controller 1
XXXXXXXXXXXXXXX5
XXXXXXXXXXXXXXX6
XXXXXXXXXXXXXXX7
Note: In WWNs, "X" is an arbitrary number or character. The ports in the same physical storage system have the
identical value.
HUS/AMS/WMS
The table below shows the system parameters that must be specified for ports on HUS, AMS, and
WMS storage systems when used with External Storage. You can specify or omit any other
parameters.
64 Supported external storage systems