HP XP P9500 Storage - Manual (Page 28)

Remote replication software
Mapped external volumes can be used with the following remote replication software:
•
Continuous Access Synchronous
•
Continuous Access Synchronous Z
•
Continuous Access Journal
•
Continuous Access Journal Z
After mapping and formatting an external volume, it is ready to use as a pair volume. The following
figures show examples of an external volume used as an S-VOL (T-VOL in a Cnt Ac-S Z pair).
Figure 2 Cnt Ac-J and Cnt Ac-J Z example using a mapped external volume
Figure 3 Cnt Ac-S and Cnt Ac-S Z example using a mapped external volume
SNMP Agent
Information about both the mapped external volume and the External port can be displayed by
SNMP Agent.
Customized Volume
For mainframe external volumes, use the Virtual LVI function to format or to perform the Write to
Control Blocks operation immediately after mapping. See the HP XP P9000 Provisioning for
Mainframe Systems User Guide for information.
If you create LDEVs from an external volume using the Virtual LVI or Virtual LUN function, the Cache
Mode setting of the created LDEVs is the same as the mapped external volume.
28 HP P9500 software supported for external volumes