5-4 addwwnforlun, Addwwnforlun, Table 4-49 addwwnforlun command parameters – HP StorageWorks XP10000 Disk Array User Manual
Page 75

Command Line Interface Commands 75
"wwn=22.33.44.55.44.55.44.33,11.33.22.33.44.33.22.22"
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 HostStorageDomain elements:
An instance of HostStorageDomain
objectID=HSDOMAIN.HDS9980V.10001.1.1
portID=1
domainID=1
hostMode=Standard
displayName=CL1-B-1
nickname=HCMD0103
List of 2 WWN elements:
An instance of WWN
WWN=22.33.44.55.44.55.44.33
nickname=Jane
An instance of WWN
WWN=11.33.22.33.44.33.22.22
nickname=Jone
4-5-4 AddWWNForLun
AddWWNForLun
secures a path by assigning a WWN to it.
Users with access to this command:
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
•
Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.
NOTE:
When AddWWNForLun secures a path, LUN security is automatically enabled.
NOTE:
This command supports only the StorageWorks XP512/XP48 subsystems.
Table 4-49
AddWWNForLun Command Parameters
Parameter Name Status
Description
serialnum
Required Serial number of the port's storage array.
model
Required Model of the port's storage array.
port
Required Port
number.
domain
Required Domain ID of the path.
devnum
Required Device number used to identify the path.
wwn
Required Comma-separated list of WWNs to secure the path.
Command execution example:
hdvmcli AddWwnForLun -o "D:\logs\XP512 AddWwnForLun.log" "serialnum=10001" "model=XP512"
"port=16" "devnum=16" "domain=0" "wwn=AA.AA.AA.AA.AA.AA.AA.AA"
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Path elements: