3-13 modifyarrayreservation, 3-14 modifylogicalunit, Modifyarrayreservation – HP StorageWorks XP10000 Disk Array User Manual
Page 57: Modifylogicalunit

Command Line Interface Commands 57
isComposite=0
continuousAccessVolumeType=Simplex
businessCopyVolumeType=S-VOL
snapshotVolumeType=Simplex
journalVolumeType=Simplex
sysVolFlag=0
externalVolume=0
differentialManagement=0
.
. (repeated for other ReplicationInfo instances)
.
4-3-13 ModifyArrayReservation
ModifyArrayReservation
extends the period of time that can elapse before the target storage subsystem
is unlocked (see Table 4.32). Reservation affects only Storage Array Commands and LUN Commands.
GetStorageArray
can be executed for subsystems reserved by another user. The commands listed in
section
4-3-1
can be performed under your reservation. If the configuration is not changed and
ModifyArrrayReservation
is not executed, the reservation will expire in 5 minutes. If
ModifyArrrayReservation
is executed, the period of time is reset again to expire in five minutes.
Users with access to this command:
•
Yes: System Administrator, Storage Administrator
•
No: Local System Administrator, Local Storage Administrator, Guest, Local Guest
NOTE:
A Local System Administrator or Local Storage Administrator can specify only storage subsystems
containing accessible LDEVs. If any other storage subsystems are specified, an error occurs.
Table 4-32
ModifyArrayReservation Command Parameters
Parameter Name
Status
Description
model
Required
Model of the storage subsystem.
serialnum
Required
Serial number of the storage subsystem.
Command execution example:
hdvmcli ModifyArrayReservation -o "D:\logs\ModifyArrayReservation.log" "model=XP12000"
"serialnum=14009"
Command execution result:
An instance of ArrayReservation
objectID=ARRAYRESERVATION.USP.14009
target=ARRAY.USP.14009
loginID=dmuser
beginTime=1,039,003,476
4-3-14 ModifyLogicalUnit
ModifyLogicalUnit
modifies the LU and its corresponding LDEV in a storage device (see
Table 4-33
).
Users with access to this command:
•
Yes: System Administrator, Storage Administrator
•
No: Guest, Local System Administrator, Local Storage Administrator, Local Guest
Format for the StorageWorks XP12000/XP10000 and StorageWorks XP1024/XP128:
hdvmcli [URL] ModifyLogicalUnit [option] serialnum=serial-number model=model
devnum=device-number {commanddevice={true|false}|commanddevicesecurity={true|false}}
Format for the StorageWorks XP512/XP48:
hdvmcli [URL] ModifyLogicalUnit [option] serialnum=serial-number model=model
devnum=device-number commanddevice={true|false} [commanddevicesecurity={true|false}]