3-9 deleteluse, 3-10 deletestoragearray, Deleteluse – HP StorageWorks XP10000 Disk Array User Manual
Page 34: Deletestoragearray, Table 4-15 deletelogicalunit command parameters, Table 4-16 deletelogicalunit command parameters, Table 4-17 addstoragearray command parameters
Command Line Interface Commands 34
Table 4-15
DeleteLogicalUnit Command Parameters
Parameter Name
Status
Description
devnum
Required
Device number of the LU.
model
Required
Model of the storage array of the LU.
serialnum
Required
Serial number of the storage array of the LU.
Command execution example:
hdvmcli DeleteLogicalUnit -o "D:\logs\XP12000 DeleteLogicalUnit.log" "serialnum=10001"
"model=XP12000" "devnum=1"
Command execution result:
RESPONSE:
(Command completed; empty list returned)
4-3-9 DeleteLUSE
DeleteLUSE
deletes a LUSE without any path in the storage device (see
Table 4-16
).
Users with access to this command:
•
Yes: System Administrator, Storage Administrator
•
No: Guest, Local Guest
•
Restricted to permitted LDEVs only: Local System Administrator, Local Storage Administrator
NOTE:
This function is not available for the StorageWorks XP512/XP48.
Table 4-16
DeleteLogicalUnit Command Parameters
Parameter Name
Status
Description
serialnum
Required
Serial number of the storage array from which the LUSE is to be deleted.
model
Required
Model of the storage array from which the LUSE is to be deleted.
devnums
Required
Device number used to identify the LUSE to be deleted. LUSE device number
must be valid in the storage array.
Command execution example:
hdvmcli DeleteLUSE -o "D:\logs\XP1024 DeleteLUSE.log" "serialnum=10001" "model=XP1024"
"devnum=209"
Command execution result:
RESPONSE:
(Command completed; empty list returned)
4-3-10 DeleteStorageArray
DeleteStorageArray
removes a HP StorageWorks Disk Array from the Device Manager management-
target, but does not attempt to change the configuration of any storage device (see
Table 4-17
).
Users with access to this command:
•
Yes: System Administrator, Storage Administrator
•
No: Guest, Local System Administrator, Local Storage Administrator, Local Guest
Table 4-17
AddStorageArray Command Parameters
Parameter Name
Status
Description
serialnum
Required
Serial number of the storage array to be deleted.
model
Required
Model of the storage array to be deleted.
Command execution example: