HP StorageWorks XP10000 Disk Array - Manual (Page 106)

Command Line Interface Commands 106
Table 4-80 DeleteReplication Command Parameters
Parameter Name Status Description
pvolserialnum Optional Specify the serial number of the storage subsystem that contains the primary volume
(P-VOL).
pvoldevnum Optional Specify the device number of P-VOL.
svolserialnum Optional Specify the serial number of the storage subsystem that contains the S-VOL.
svolsequencenum
Optional Specify the sequence number of the storage subsystem that contains the S-VOL.
svoldevnum
Optional Specify the device number of S-VOL.
Command execution example 1: This example deletes a copy pair for Continuous Access XP that has been
defined in copy group 8. The primary volume (P-VOL) is the LDEV number 10, serial number 65010001. The
secondary volume (S-VOL) is LDEV number 11, sequence number 0012. The execution result displays the
remaining copy pairs after deleting the specified copy pair.
hdvmcli DeleteReplication -o "D:\logs\XP1024 DeleteReplication.log"
"replicationgroupid=8" "pvolserialnum=65010001" "pvoldevnum=10" "svolsequencenum=0012"
"svoldevnum=11"
Command execution result 1:
RESPONSE:
An instance of ReplicationGroup
objectID=REPGROUP.7
replicationGroupID=7
groupName=HCMD_CG0007
pvolHostID=1
pvolInstanceNumber=11
pvolPortNumber=50,001
svolHostID=2
svolInstanceNumber=12
svolPortNumber=50,002
replicationFunction=ContinuousAccess
fenceLevel=Never
copyTrackSize=15
List of 1 ReplicationInfo elements:
An instance of ReplicationInfo
objectID=REPINFO.65010001.12.0012.25
pairName=HCMD_CP0004
pvolSerialNumber=65010001
pvolArrayType=HDS9980V
pvolDevNum=12
pvolObjectID=LU.HDS9980V.65010001.12
pvolPoolID=-1
svolSerialNumber=65010012
svolArrayType=HDS9980V
svolDevNum=25
svolObjectID=LU.HDS9980V.65010012.25
svolPoolID=-1
fenceLevel=Never
replicationFunction=ContinuousAccess
status=8
muNumber=-1
copyTrackSize=15
splitTime=-1
Command execution example 2: This example deletes copy group 7 and all copy pairs defined in this copy
group.
hdvmcli DeleteReplication -o "D:\logs\XP1024 DeleteReplication.log"
"replicationgroupid=7"
Command execution result 2: