HP StorageWorks XP10000 Disk Array - Manual (Page 83)

Command Line Interface Commands 83
• No: Guest, Local Guest
• Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.
NOTE:
ModifyWWNGroup
is supported by StorageWorks XP512/XP48 storage subsystems only.
Table 4-60 ModifyWWNGroup Command Parameters
Parameter Name Status Description
serialnum Required Serial number of the storage array in which the WWN group exists.
model Required Model of the storage array in which the WWN group exists.
port Required Port number of the WWN group.
objectid
Required Object ID of the WWN group.
wwn Required Comma-separated list of WWNs to be added to the WWN group.
nickname Optional Unique nickname of the WWN group.
name
Optional The name given to the WWN group.
Command execution example:
hdvmcli ModifyWWNGroup -o "D:\logs\XP512 ModifyWWNGroup.log" "serialnum=10001"
"model=XP512" "port=19" "objectid=WWNGROUP.HDS9960.10001.19.hp"
"wwn=AA.AA.AA.AA.AA.AA.AA.AA,BB.BB.BB.BB.BB.BB.BB.BB" "nickname=hp"
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Port elements:
An instance of Port
.
. (Attributes of Port are omitted here)
.
List of 1 WWNGroup elements:
An instance of WWNGroup
objectID=WWNGROUP.HDS9960.10001.0.19.hp
nickname=hp
List of 2 WWN elements:
An instance of WWN
WWN=AA.AA.AA.AA.AA.AA.AA.AA
nickname=Jane
An instance of WWN
WWN=BB.BB.BB.BB.BB.BB.BB.BB
nickname=Jone
4-6 Host Management Commands
The following commands support the management of hosts and their HostInfo records. HostInfo is the
information about the storage that is used by hosts. Although typically Device Manager agents produce
HostInfo
records, they can be manually created by these commands. Some commands require a host’s
server-generated object ID.
For further information on host operations, please refer to the HP StorageWorks Command View XP Advanced
Edition Device Manager Web Client User Guide.