3-4 addluse, Addluse, Table 4-11 addluse command parameters – HP StorageWorks XP10000 Disk Array User Manual
Page 29
Command Line Interface Commands 29
path=false
onDemandDevice=false
devType=
isStandardLDEV=false
guardMode=
substance=0
volumeType=3
diskType=-1
cacheResidencyMode=-1
stripeSizeInKB=-1
slprNumber=-1
clprNumber=-1
volumeKind=3
4-3-4 AddLUSE
AddLUSE
creates a LUSE without any path in the storage device (see
Table 4-11
).
Users with access to this command:
•
Yes: System Administrator, Storage Administrator
•
No: Guest, Local Guest
•
Restricted to permitted resources: Local System Administrator, Local Storage Administrator
NOTE:
This function is not available for the StorageWorks XP512/XP48.
Table 4-11
AddLUSE Command Parameters
Parameter Name
Status
Description
serialnum
Required
Serial number of the storage array from which LUSE is added.
model
Required
Model of the storage array from which the LUSE is added.
devnums
Required
Comma-separated list of LDEV device numbers to create the LUSE.
Command execution example:
hdvmcli AddLUSE -o "D:\logs\XP1024 AddLUSE.log" "serialnum=15001" "model=XP1024"
"devnums=1001,1002"
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Lu elements:
An instance of LogicalUnit
objectID=LU.HDS9980V.15001.1001
devNum=1,001
displayName=3:E9
emulation=OPEN-3
devCount=2
devType=
capacityInKB=4,806,720
path=false
commandDevice=false
chassis=3
arrayGroup=16
raidType=RAID5(3D+1P)
currentPortController=-1
defaultPortController=-1
isComposite=1
continuousAccessVolumeType=Simplex
businessCopyVolumeType=Simplex
snapshotVolumeType=Simplex