Table 4-3 logical group commands, Table 4-4 lun commands – HP StorageWorks XP10000 Disk Array User Manual
Page 22
Command Line Interface Commands 22
Table 4-2
Storage Array Commands
Storage Subsystems
Command Name
Description
XP12000/XP10000
and XP1024/XP128
XP512/XP48
Section
ModifyArrayReservation
Extends the maximum period for
which a specified storage subsystem
is locked.
Y Y
4-3-13
ModifyLogicalUnit
Modifies the settings of the logical
units and the corresponding LDEVs.
Y Y
4-3-14
ModifyPort
Modifies port attributes.
Y
Y
4-3-15
ModifyPortController
Modifies port controller attributes.
Y
Y
4-3-16
RefreshStorageArrays
Obtains the most recent status of all
storage subsystems managed by the
Device Manager server.
Y Y
4-3-17
NOTE:
You can use the subtarget parameter to specify the device information. Available values are:
•
subtarget=ArrayGroup (see section
4-3-12-1
)
•
subtarget=Commparameters (see section
4-3-12-2
)
•
subtarget=Component (see section
4-3-12-3
)
•
subtarget=Filter (see section
4-3-12-4
)
•
subtarget=FreeSpace (see section
4-3-12-5
)
•
subtarget=HostStorageDomain (see section
4-3-12-6
)
•
subtarget=LDEV (see section
4-3-12-7
)
•
subtarget=LogicalUnit (see section
4-3-12-8
)
•
subtarget=Path (see section
4-3-12-9
)
•
subtarget=PDEV (see section
4-3-12-10
)
•
subtarget=Port (see section
4-3-12-11
)
•
subtarget=PortController (see section
4-3-12-12
)
•
subtarget=ReplicationInfo (see section
4-3-12-13
)
Table 4-3
Logical Group Commands
Command Name
Description
Section
AddLogicalGroup
Creates a logical group.
4-4-1
AddLunScan
Scans a storage subsystem in a LUN that is not allocated to a logical
group.
4-4-2
AddObjectForLogicalGroup
Adds one or more existing objects (host storage domain or host) to a
specified logical group in the Device Manager server.
4-4-3
DeleteLogicalGroup
Deletes an existing logical group from the Device Manager server.
4-4-4
DeleteObjectForLogicalGroup
Deletes a specified object from the logical group.
4-4-5
GetLogicalGroup
Obtains information about a specified logical group or all logical
groups.
4-4-6
ModifyLogicalGroup
Modifies one or more attributes of an existing logical group.
4-4-7
Table 4-4
LUN Commands
Storage Subsystems
Command Name
Description
XP12000/XP10000
and XP1024/XP128
XP512/XP48
Section
AddLun
Defines a path to a volume from
the host.
Y Y
4-5-1
AddLunGroup
Creates a LUN group.
--
Y
4-5-2