HP StorageWorks XP10000 Disk Array - Manual (Page 21)

Command Line Interface Commands 21
Table 4-1 Extracting Parameter Values
To Find This Parameter Value: Do This:
svolserialnum Execute the GetHost command, and then obtain the value from the execution result.
wwn Execute the GetStorageArray (subtarget=Port, portsubinfo=WWN,
WWNGroup, wwngroupsubinfo=WWN)
command, specifying WWN for the portsubinfo
parameter, and then obtain the value from the execution result.
NOTE: As an alternative method, you can specify the wwn parameter by creating a new
WWN
. You can use a WWN group to set the security if you specify all the WWNs
existing in the WWN group.
wwngroup
Execute the GetStorageArray (subtarget=Port, portsubinfo=WWNGroup)
command, specifying WWNGroup for the portsubinfo parameter. Use the nickname
value that appears in WWNGroup.
4-2 Supported CLI Commands
Table 4-2 through Table 4-7 give details about Device Manager CLI commands.
• Y indicates that the particular storage subsystem can be used to execute the command.
• -- indicates that it cannot be used to execute the command.
Table 4-2 Storage Array Commands
Storage Subsystems Command Name Description
XP12000/XP10000
and XP1024/XP128 XP512/XP48
Section
AddArrayReservation Locks a specified storage subsystem. Y Y 4-3-1
AddHostStorageDomain Creates a host storage domain or
host group. Y Y 4-3-2
AddLogicalUnit Creates an LDEV and a logical unit in
the storage subsystem. Y Y 4-3-3
AddLUSE
Creates a LUSE that does not have a
path. Y -- 4-3-4
AddStorageArray
Detects a specified storage
subsystem and sets it as the device
to be managed by the Device
Manager server. Information about
the devices of the detected storage
subsystem is registered in the Device
Manager server database. Y Y 4-3-5
DeleteArrayReservation Unlocks a specified storage
subsystem. Y Y 4-3-6
DeleteHostStorageDomain Deletes a host storage domain or
host group. Y Y 4-3-7
DeleteLogicalUnit Deletes one or more LUs and the
corresponding LDEVs. Y Y 4-3-8
DeleteLUSE
Deletes a LUSE that does not have a
path. Y -- 4-3-9
DeleteStorageArray
Excludes a storage subsystem from
the group of storage subsystems
managed by the Device Manager
server. Y Y 4-3-10
GetArrayReservation
Obtains information about the locked
storage subsystem. Y Y 4-3-11
GetStorageArray
(see Note ) Obtains information about the storage
subsystems.
Y Y 4-3-12