5-11 deletewwnforlun, 5-12 deletewwnforlungroup, Deletewwnforlun – HP StorageWorks XP10000 Disk Array User Manual
Page 80: Deletewwnforlungroup, Table 4-56 deletewwnforlun command parameters, Table 4-57 deletewwnforlungroup command parameters
Command Line Interface Commands 80
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-5-11 DeleteWWNForLun
DeleteWWNForLun
removes access to a WWN path (see
Table 4-56
).
NOTE:
This command is available only to users of the StorageWorks XP512/XP48.
Users with access to this command:
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
•
Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.
Table 4-56
DeleteWWNForLun Command Parameters
Parameter Name Status
Description
serialnum
Required
Serial number of the port’s storage array.
model
Required
Model of the port’s storage array.
port
Required Port
number.
domain
Required
Domain ID of the path.
devnum
Required
Device number used to identify the path.
wwn
Required
Comma-separated list of WWNs for which path security is to be removed.
Command execution example:
hdvmcli DeleteWwnForLun -o "D:\logs\XP512 AddWwnForLun.log" "serialnum=10001"
"model=XP512" "port=16" "devnum=16" "domain=0" "wwn=11.55.77.99.33.00.22.66"
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-5-12 DeleteWWNForLunGroup
DeleteWWNForLunGroup
removes one or more WWN(s) from a LUN group (XP512/XP48 subsystem only)
(see
Table 4-57
).
Users with access to this command:
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
•
Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.
NOTE:
DeleteWWNForLunGroup
is supported by StorageWorks XP512/XP48 storage subsystems only.
Table 4-57
DeleteWWNForLunGroup Command Parameters
Parameter Name Status
Description
serialnum
Required Serial number of the storage array in which the LUN group exists.
model
Required Model of the storage array in which the LUN group exists.
port
Required Port number of the LUN group.
objectid
Required Object ID of the LUN group.