3-7 deletehoststoragedomain, 3-8 deletelogicalunit, Deletehoststoragedomain – HP StorageWorks XP10000 Disk Array User Manual
Page 33: Deletelogicalunit, Table 4-13 addstoragearray command parameters
Command Line Interface Commands 33
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
Table 4-13
AddStorageArray Command Parameters
Parameter Name
Status
Description
model
Required
Model of the storage subsystem.
serialnum
Required
Serial number of the storage subsystem.
Command execution example:
hdvmcli DeleteArrayReservation -o "D:\logs\DeleteArrayReservation.log" "model= XP12000"
"serialnum=14009"
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-3-7 DeleteHostStorageDomain
DeleteHostStorageDomain
deletes a host storage domain. For the StorageWorks XP12000/XP10000 and
XP1024/XP128, this command deletes a host group from the storage subsystem (see
Table 4-14
).
Users with access to this command:
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
NOTE:
When a host group or host storage domain to which paths are assigned is specified, access
permissions to all the LDEVs to which paths are assigned are required. If any inaccessible LDEVs are
included, an error occurs.
Table 4-14
DeleteStorageHostDomain Command Parameters
Parameter Name
Status
Description
deletionoption
Optional
Only possible value is: lusekeep
Omit this parameter to delete a LUSE.
domain
Required
The domain ID of the Host Storage Domain to be deleted.
NOTE:
Do not specify 0. You cannot delete host domain 0.
model
Required
Model of the storage array for the Host Storage Domain.
port
Required
The port ID of the Host Storage Domain to be deleted.
serialnum
Required
Serial number of the storage array for the Host Storage Domain.
Command execution example:
hdvmcli DeleteHostStorageDomain -o "D:\logs\XP1024 DeleteHostStorageDomain.log"
"serialnum=10001" "model=XP1024" "port=16" "domain=1" "deletionoption=lusekeep"
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-3-8 DeleteLogicalUnit
DeleteLogicalUnit
deletes the logical unit and corresponding LDEV from the storage device (see
Table 4-
15
).
Users with access to this command:
•
Yes: System Administrator, Storage Administrator
•
No: Guest, Local System Administrator, Local Storage Administrator, Local Guest