HP StorageWorks XP10000 Disk Array - Manual (Page 62)

Command Line Interface Commands 62
objectID=HSDOMAIN.HDS9980V.10001.16.0
portID=16
domainID=0
nickname=HDvM1000
hostMode=Standard
4-3-16 ModifyPortController
ModifyPortController
supports changing characteristics of a PortController (see Table 4-37 ).
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: Guest, Local System Administrator, Local Storage Administrator, Local Guest
Table 4-37 ModifyPortController Command Parameters
Parameter Name Status Description
serialnum Required Serial number of the port controller’s storage array.
model Required Model of the port controller’s storage array.
ctrlid Required Number of the port controller.
adaptermode
Required New adapter mode value of the port controller.
Command execution example:
hdvmcli ModifyPortController -o "D:\logs\XP1024 ModifyPortController.log"
"serialnum=10001" "model=XP1024" "ctrlid=1" "adaptermode=1"
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 PortController elements:
An instance of PortController
objectID=CONTROLLER.HDS9980V.10001.1
cluster=1
card=1
controllerID=1
displayName=CHA-1P
mode=1
type=12
4-3-17 RefreshStorageArrays
RefreshStorageArrays
updates all discovered storage subsystems to their latest state (see Table 4-38 ).
The storage subsystems created by the Remote Console or Remote Web Console are applied to the Device
Manager server database.
By executing this command at regular intervals, you can ensure that the storage subsystem information in the
Device Manager server database is up to date.
NOTE: To update one storage subsystem, use the AddStorageArray command.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: Guest, Local System Administrator, Local Storage Administrator, Local Guest
Table 4-38 RefreshStorageArrays Command Parameters
Parameter Name Status Description