HP StorageWorks XP10000 Disk Array - Manual (Page 60)

Command Line Interface Commands 60
Table 4-34 ModifyPort Command Parameters
Parameter Name Status Description
hostmode Optional New host connect mode value for the port. To change this value, you
must specify the domain parameter.
For values available to the StorageWorks XP Disk Array, see
Table 4-
35 .
hostModeOption
Optional
(XP12000/XP10000 only) An option of the host connection mode. To specify two or more options,
separate them with semicolons (;).
For details on the values that you can specify, see
Table 4-36 .
Table 4-35 HostMode Parameter Values (StorageWorks XP Disk Array)
Storage Subsystem Available Values for Setting the HostMode Parameter
StorageWorks XP12000/XP10000 Possible values are:
Standard
Sequent
HP
Solaris
Netware
Windows
Windows Extension
Tru64
HI-UX
AIX
OPEN-VMS
The following value relies on the DKC microcode version.
For 50-03-0X-XX/XX or later:
UVM
StorageWorks XP1024/XP128 Possible values are:
Standard
Sequent
HP
Solaris
Netware
Windows
Windows Extension
Tru64
HI-UX
AIX
OPEN-VMS
For 21-05-00-XX/XX or later:
Windows Extension
Solaris Extension
For 21-14-02-XX/XXor later:
Standard Extension2
HP Extension2
Solaris Extension2
Windows Extension2
StorageWorks XP512/XP48 Possible values are:
Standard
Sequent
HP
Solaris
Netware
Windows
Tru64
AIX
OPEN-VMS
Table 4-36 lists the hostModeOption parameter values and descriptions: