5-7 deletelun, 5-8 deletelungroup, Deletelun – HP StorageWorks XP10000 Disk Array User Manual
Page 78: Deletelungroup, Table 4-52 deletelun command parameters, Table 4-53 deletelungroup command parameters
Command Line Interface Commands 78
nickname=Jone
4-5-7 DeleteLun
DeleteLun
deletes a path from a host to a volume (see
Table 4-52
). If the LUN is secured, the corresponding
WWN is required.
Users with access to this command:
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
•
Restricted to permitted resources: Local System Administrator, Local Storage Administrator
Table 4-52
DeleteLun Command Parameters
Parameter Name
Status
Description
serialnum
Required
Serial number of the path’s storage array.
model
Required
Model of the path’s storage array.
port
Required
Port number of the path.
domain
Required
Domain ID of the path.
devnum
Required
Device number used to identify the path.
deletionoption
Optional
Only value possible: “lusekeep”, which is not case-sensitive. Omit this parameter to
delete a LUSE.
Command execution example:
hdvmcli DeleteLun -o "D:\logs\XP1024 DeleteLun.log" "serialnum=10001" "model=XP1024"
"port=1" "domain=1" "devnum=1" "deletionoption=lusekeep"
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-5-8 DeleteLunGroup
DeleteLunGroup
deletes a LUN group assigned to a port (XP512/XP48 subsystem only); any LUNs (paths)
in the group are not deleted (see
Table 4-53
). A WWN can be specified, and access is removed for just that
WWN.
Users with access to this command:
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
•
Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.
NOTE:
DeleteLunGroup
is supported by StorageWorks XP512/XP48 storage subsystems only.
Table 4-53
DeleteLunGroup Command Parameters
Parameter Name
Status
Description
serialnum
Required
Serial number of the LUN group’s storage array.
model
Required
Model of the LUN group’s storage array.
port
Required
ID for the port of LUN group to be deleted.
lungroupid
Required
Object ID of the LUN group to be deleted.
Command execution example:
hdvmcli DeleteLunGroup -o "D:\logs\XP512 DeleteLunGroup.log" "serialnum=10011"