HP StorageWorks XP10000 Disk Array - Manual (Page 41)

Command Line Interface Commands 41
description=Normal
An instance of Component
name=DKC Cache Switch
value=1
description=Normal
An instance of Component
name=DKC Environment
value=1
description=Normal
An instance of Component
name=DKC Fan
value=1
description=Normal
An instance of Component
name=DKC Power Supply
value=1
description=Normal
An instance of Component
name=DKC Processor
value=1
description=Normal
An instance of Component
name=DKC Shared Memory
value=1
description=Normal
An instance of Component
name=DKU Drive
value=1
description=Normal
An instance of Component
name=DKU Environment
value=1
description=Normal
An instance of Component
name=DKU Fan
value=1
description=Normal
An instance of Component
name=DKU Power Supply
value=1
description=Normal
4-3-12-4 GetStorageArray (subtarget=Filter)
GetStorageArray (subtarget=Filter) obtains the information about a specific component of one or all
storage subsystems.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: None
• Restricted to permitted resources: Guest, Local System Administrator, Local Storage Administrator, Local
Guest
Table 4-22 GetStorageArray (subtarget=Filter) Command Parameters
Parameter Name Status Description
model Optional Model of the storage subsystem. When you omit this parameter, you will
obtain information about the models of all storage subsystems.
serialnum Optional Serial number of the storage subsystem. When you omit this parameter,
all the storage subsystems become the target.
subtarget Required Specify Filter .