HP StorageWorks XP10000 Disk Array - Manual (Page 36)

Command Line Interface Commands 36
Command execution example: In this example, the CLI command obtains information about the configuration
of all the storage subsystems managed by the Device Manager server:
hdvmcli GetStorageArray
Command execution result:
RESPONSE:
An instance of StorageArray
objectID=ARRAY.HDS9960.10011
name= [email protected]
description= XP512 (10011) at 10.208.114.140
serialNumber=10011
arrayFamily=HDS9900
arrayType=HDS9960
microcodeVersion=01-13-56/00
agentVersion=02-01-06/00
productName=XP512
controllerVersion=01-18-01-00/00
numberOfControllers=1
capacityInGB=1,326
cacheInMB=7,168
sharedMemoryInMB=-1
numberOfSpareDrives=-1
freeCapacityInGB=701
allocatedCapacityInGB=624
autoLunCapacityInGB=0
onDemandCapacityInGB=0
totalFreeSpaceInGB=124
largestFreeSpaceInGB=63
capacityInKB=1,390,713,840
freeCapacityInKB=735,710,400
allocatedCapacityInKB=655,003,440
autoLunCapacityInKB=0
onDemandCapacityInKB=0
totalFreeSpaceInKB=130,084,560
largestFreeSpaceInKB=67,096,800
multipathSupport=1
securityStatus=1
sequenceNumber=10011
displayArrayFamily=XP512/48
displayArrayType=XP512
numberOfLUs=626
numberOfAllocatedLUs=210
numberOfUnallocatedLUs=416
slprStatus=-1
4-3-12-1 GetStorageArray (subtarget=ArrayGroup)
GetStorageArray (subtarget=ArrayGroup)
obtains information about one or all array groups in one or
all storage subsystems.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: None
• Restricted to permitted resources: Guest, Local System Administrator, Local Storage Administrator, Local
Guest
Table 4-19 GetStorageArray (subtarget=ArrayGroup) Command Parameters
Parameter Name Status Description
model
Optional Model of the storage subsystem. When you omit this parameter, you will
obtain information about the models of all storage subsystems.