HP StorageWorks XP10000 Disk Array - Manual (Page 107)

Command Line Interface Commands 107
RESPONSE
(Command completed; no data returned)
4-8-4 GetReplicationControllerPair
GetReplicationControllerPair obtains information about a replication controller pair.
In the StorageWorks XP Disk Array, the pairs indicate paths between MCUs and RCUs.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: Guest, Local Guest
• Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.
Table 4-81 GetReplicationControllerPair Command Parameters
Parameter Name Status Description
masterserialnum Optional Specify the serial number of the storage subsystem that contains the main control
unit (MCU).
mastercontrollerid Optional Specify the CU number of the MCU.
remoteserialnum Optional Specify the serial number of the storage subsystem that contains the remote
control unit (RCU).
remotessid Optional Specify the SSID of the RCU.
Command execution example 1: This example obtains controller pair information for the MCU with CU number
10
in the storage subsystem with serial number 35001 and for the RCU with SSID 65534 in the storage
subsystem with serial number 15001.
hdvmcli GetReplicationControllerPair -o "D:\logs\XP128 GetReplicationControllerPair.log"
"masterserialnum=35001" "mastercontrollerid=10" "remoteserialnum=15001"
"remotessid=65534"
Command execution result 1:
RESPONSE
An instance of ReplicationControllerPair
objectID=REPCTLPAIR.35001.10.15001.65534
masterArrayType=HDS9970V
masterSerialNumber=35001
masterControllerID=10
masterStartDevNum=0
masterEndDevNum=255
remoteArrayType=HDS9980V
remoteSerialNumber=15001
remoteSSID=65534
remoteControllerID=15
remoteStartDevNum=0
remoteEndDevNum=255
Command execution example 2: This example obtains the controller pair information in all storage subsystems
that have been registered in the Device Manager database.
hdvmcli GetReplicationControllerPair -o "D:\logs\XP128 GetReplicationControllerPair.log"
Command execution result 2:
RESPONSE
An instance of ReplicationControllerPair
objectID=REPCTLPAIR.35001.10.15001.65534
masterArrayType=HDS9970V
masterSerialNumber=35001
masterControllerID=10
masterStartDevNum=0
masterEndDevNum=255