HP Matrix Operating Environment Software - Manual (Page 79)

• WARN—A configuration problem was found. The problem will not necessarily prevent
correct operation, but it may limit or restrict operation of some features.
• N/A—Not Applicable: the check does not apply to this type of system.
IOAssist execution timeout
The default timeout value for each IOAssist check is two minutes. A timeout indicates that the
verified component (Insight Orchestration, its subsystem or partner) either is not responding or
is unavailable, or is responding in an undesirable response time.
If IOAssist times out, you can only assume that the component is not responding in the expected
response time. You cannot assume that the component is unavailable. Any other conclusion is
indicated by IOAssist error messages.
Working with services
Service creation
Physical
Troubleshooting items addressed in this section:
• Unable to allocate servers and networks in the same Virtual Connect Domain Group. Either
more available servers are required, or could not match existing servers against memory
size, disk space and processor count requirements.
• Task for logical server …. Failure: At least one OS or software
deployment has failed. Check the deployment service to diagnose the details.
• Provisioning request for has paused. Manual data disk allocation is required.
• Task for logical server has failed. Logical server job (ID = …) completed
with a failure status. The deployment server does not have the specified system UUID
recorded. Deployment Service Connector cannot confirm the system UUID provided by the
caller.
• Task for logical server has failed. Job has exceeded its timeout
value of minutes. Marking the job as failed.
• Multiple messages: Could not find server with serial number . Or Task for
logical server has failed. Logical server job completed with a
failure status. Failure: Exception creating connection to: 15.2.50.138; nested exception is:
java.net.NoRouteToHostException: No route to host: connect. Or Task for logical server
has failed. Logical server job completed with a failure status.
Failure: no such object in table.
• The Manual Storage Provisioning email states that I should add more data LUNs than are
required.
• I cannot add servers to an existing service using a Static IP address.
• A provisioning request remains paused during a manual storage allocation (approximately
5%), and I cannot create a storage pool on HP Insight Dynamics because the VCDG is not
listed on the Storage Pools screen.
• The operating system deployment process through Insight Control server deployment fails
when deploying to a SAN booted physical server.
• A request with a future start date stays at 10% (Progress field), with status of Reserved
(rather than Scheduled).
• Physical server provisioning using Insight Control server deployment fails during the final
personalization step when the CMS is configured with an automatic proxy configuration
script in IE.
• Server reservation and allocation fail with the following messages, even though servers exist
in the assigned pool that will satisfy the template requirements.
Working with services 79