HP Matrix Operating Environment Software - Manual (Page 24)

NOTE: If you intend to use this network on the management system, select Allow
management operation system to share the network adapter .
7. Select OK.
Using VLAN tags in a Hyper-V VM network
Insight Orchestration 6.2 supports VLAN tagging with Hyper-V VM guests. VLAN tagging
support requires using HP Network Configuration Utility (NCU) to create vNICS for each VLAN
on the Hyper-V hosts and an associated Hyper-V virtual switch.
To configure your system so that HP Insight Orchestration can provision tagged Hyper-V guests,
complete the following steps.
NOTE: This procedure assumes an existing system with Hyper-V installed, and at least one
NIC connected to an 802.1Q network carrying multiple VLAN IDs. For information on adding
a network for use by the Hyper-V VM host, see
“Setting up a Hyper-V virtual machine network” ).
1. Install and launch the HP Network Configuration Utility (NCU).
24 Configuration