Accton Technology VS4512DC - Manual (Page 219)

Authentication Commands
4-73
Example
show dot1x
This command shows general port authentication related settings on the switch or a
specific interface.
Syntax
show dot1x [statistics] [interface interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Displays the global port access control parameters
that can be configured for this switch as described in the preceding pages,
including reauth-enabled (page 4-71), reauth-period (page 4-72), quiet-period
(page 4-71), tx-period (page 4-72), and max-req (page 4-69). It also displays
the following global parameters which are set to a fixed value, including the
following items:
- supp-timeout– Supplicant timeout.
- server-timeout– Server timeout.
- reauth-max– Maximum number of reauthentication attempts.
• 802.1X Port Summary – Displays the port access control parameters for each
interface, including the following items:
- Status– Administrative state for port access control.
- Mode– Dot1x port control mode (page 4-70).
- Authorized– Authorization status (yes or n/a - not authorized).
• 802.1X Port Details – Displays detailed port access control settings for each
interface as described in the preceding pages, including administrative status
for port access control, Max request (page 4-69), Quiet period (page 4-71),
Reauth period (page 4-72), Tx period (page 4-72), and Port-control
(page 4-70). It also displays the following information:
- Status– Authorization status (authorized or unauthorized).
- Supplicant– MAC address of authorized client.
Console(config)#dot1x timeout tx-period 300
Console(config)#