Accton Technology VS4512DC - Manual (Page 176)

Command Line Interface
4-30
Example
Related Commands
ip http secure-port (4-30)
copy tftp https-certificate (4-55)
ip http secure-port
This command specifies the UDP port number used for HTTPS/SSL connection to
the switch’s Web interface. Use the no form to restore the default port.
Syntax
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS/SSL.
(Range: 1-65535)
Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same port.
• If you change the HTTPS port number, clients attempting to connect to the
HTTPS server must specify the port number in the URL, in this format:
https://device:port_number
Example
Related Commands
ip http secure-server (4-29)
ip telnet server
Use this command to enable the device to be configured, or monitored, by Telnet.
Use the no form of this command to disable this function.
Syntax
[no] ip telnet server
Console(config)#ip http secure-server
Console(config)#
Console(config)#ip http secure-port 1000
Console(config)#