Accton Technology VS4512DC - Manual (Page 137)

Class of Service Configuration
3-107
Mapping IP Port Priority
In the IP Port Priority page, for each switch port or trunk, you can map IP ports
(TCP/UDP ports) to the switch’s 4 traffic class queues.
Command Attributes
• Current IP Port Table – displays a list of IP ports with their mapped class of
service queues.
• IP Port – to set a new IP port number.
• Class of Service – to set a new class of service for an IP port. Note that “0”
represents low priority and “3” represent high priority
Web – Click Priority, IP Port Priority Status and then select Enabled.
Click Priority, IP Port Priority. Select the port or trunk. To add an IP port, type the port
number in the IP Port box and the new CoS value in the Class of Service box, then
click Apply To delete an IP port setting, select the entry in the Current IP Port Table,
then click Remove IP Port.