Accton Technology VS4512DC - Manual (Page 215)

Authentication Commands
4-69
Default Setting
RADIUS
Command Mode
Global Configuration
Example
dot1x default
This command sets all configurable dot1x global and port settings to their default
values.
Syntax
dot1x default
Command Mode
Global Configuration
Example
dot1x max-req
This command sets the maximum number of times the switch port will retransmit an
EAP request/identity packet to the client before it times out the authentication
session. Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
Default
2
Command Mode
Global Configuration
Example
Console(config)#authentication dot1x default radius
Console(config)#
Console(config)#dot1x default
Console(config)#
Console(config)#dot1x max-req 2
Console(config)#