NORD Drivesystems BU0000 - Manual (Page 80)

NORD CON Manual
80 BU 0000 GB
Option Description
Parameter box Used to start up, parameterise, configure and control the inverter via
full text instructions.
Optional: snap-on installation
Control Box Used like the parameter box, however with the information displayed
in a more simplified fashion.
Optional: snap-on installation
Potentiometer Enables the drive to be controlled directly on the frequency inverter.
Optional: snap-on installation
CAN bus module
Profibus module
RS 232
InterBus
CANopen
DeviceNet
AS-Interface
With these optional CAN / CANopen / Profibus DP / RS 232 /
DeviceNet / Interbus /AS-Interface modules the SK 700E can be
controlled and parameterised (without a serial port).
Optional: snap-on installation
Custom interfaces
... are optional slide-in modules for insertion into slots which are located inside the inverter
housing. Having been plugged in they are identified by the inverter automatically. The cables are
connected using direct push-lock-type connectors with pull-off spring terminals (ZEC). With
them the devices can very conveniently be connected.