NORD Drivesystems BU0000 - Manual (Page 35)

Parameterization
35 BU 0000 GB
5 Control
5.1 Overview
The program NORD CON can be used to control NORDAC vector Frequenzumrichter. To
use this function the inverter must be parametriesed in the right way. Because of different
settings of different inverter types the user must check the manual to find the right settings.
Before the inverter can be controlled the Bus-scan must be done. After the scanning process
has finished all connected inverter are displayed in the main window. Now the inverter to be
controlled can be chosen by mouse click. The window „control" can be opened via "device/
control (F6) in the main menu or via pull-down menu (right mouse click).