NORD Drivesystems BU0000 - Manual (Page 53)

Macro editor
53 BU 0000 GB
Hexadecimal
Binary
8.1.2 Window "Properties"
The view „properties" can be opened and closed over the menu option „View->Macro-
>Properties". In this window all characteristics are indicated to the current instruction.
Depending upon instruction the kind and number of characteristics can be change.
Name Description
Result With this characteristic one can change the object to give a new value. Only objects can be
selected, which one can assign a new value (e.g. control word, parameter or variable).
Operand With this characteristic the user can select the object, which is to be used with an assignment
or an operation.
Operator With this characteristic the user can select the object, which is to be used with an assignment
or an operation.
Comment With this feature the user can add a comment to each command.
In the macro variables, control word or status word, setpoints, actual values or parameters are
called objects. Each of these objects has different parameters.
Object Parameter Description
Variable Name The parameter specifies the name of the variable or absolute term. In the selection box
all variables already used are indicated. If one would like to put on a new variable, a
name not used yet must be registered with case insensitivity.
Display
format The parameter specifies the display format in the view „variables ". It can be selected
between the following representations:
Decimale
Hexadecimale
Binary
Constant Value The parameter specifies the value of the absolute term.
Display
format The parameter specifies the display format in the view „variables ". It can be selected
between the following representations:
Decimale
Hexadecimale
Binary
Control
word or
status word Node ID The parameter specifies the USS address of the desired device.
Note:
Since the current control word cannot be read from the device, when starting scheduler
the control word is set to 0.
Display
format The parameter specifies the display format in the view „variables ". It can be selected
between the following representations: