NORD Drivesystems BU0000 - Manual (Page 48)

NORD CON Manual
48 BU 0000 GB
Scaling of each measurement
Calculation of average values, effective value, etc.
Save, print and export of measurement data
7.2 Display
The oscilloscope function can measure and display 4 channels max:
The following settings can be done:
Name Description
Auto Automatic Scaling of all measured data
Offset Selection of display detail (displace of all data in x- or y-direction)
Zoom Display size (Zoom of all data)
Note:
With the right mouse button you can choose between modi 'Move' and 'Measurement', if the
mouse pointer is on the display. In 'Move' mode you can choose the detail of display by mouse
pointer by pressing the left mouse button while moving over the display.
Auto scrolling With this option during a recording the time axis is scrolled automatically to the last point.
Resolution In this combination field the user can change the scaling of the time axis.
Comment Additional information field, in that further information to the series of measurements to be stored
can (max. 255 indications).
Cursor Execution of measurement