NORD Drivesystems BU0000 - Manual (Page 37)

Control
37 BU 0000 GB
Increase or decrease of the setting value
Change of direction
Error Acknowledge
To use this functionality, the inverter must be programmed for control via bus. You can find the
required parameter and settings in the manual available for each inverter type.
On the „Standard" display only the first setting value and first actual value are displayed. The
form of value is fixed for each configuration.
By pressing the button 'Detail' you can switch to the extended control function.
5.3 Detailed control
5.3.1 Overview
In the mode „Detailed Control" some extra functions are available:
Setting of control word and display of status word
Management of setting values and actual values
Sending of broadcast telegramme
Choice of different parameter sets
Automatic sending of control word and setting values