NORD Drivesystems BU0000 - Manual (Page 74)

NORD CON Manual
74 BU 0000 GB
Modular sub-assemblies with an adequate number of inputs and outputs for the inverter to
be linked to other control loops
Optional potentiometer function permitting the frequency to be set directly on the inverter
Automatic saving of data in the motor due to the "electronic type plate"
Universal, easily accessible connection unit enabling user-friendly manipulation
Parameter setting is conveniently carried out with a control box or a dedicated PC software
Operation
The inverter can be parameterised and controlled with either of the 2 components described
below:
NORDAC Parameter-Box (SK PAR 2H)
Handy operating device with a display and a set of operating buttons enabling the inverter
to be parameterised and controlled right on the spot where the drive is installed.
NORD CON software
Convenient software for easy operation, control and parameterisation of the inverter from a
PC.
Control options
With its modular architecture, the NORDAC trio SK 300E is a device allowing for a great variety
of expansion options. Indeed it is possible to add to the basic control equipment various custom
interfaces with inputs and outputs in adequate numbers or one or the other bus access module
as required.
Technology Boxes
Technology Boxes are optional modules with which additional functionality can be added to the
inverter, dependent on requirements. As well as bus connections for all marketed BUS
systems, a module with switch and potentiometer is available for direct speed adjustment for
on-site operation of the inverter. The inverter^s high protection grade is maintained with every
technology box.