NORD Drivesystems BU0000 - Manual (Page 75)

Getriebebau Nord
75 BU 0000 GB
Technology Boxes
Potentiometer-Box
SK TU2-POT
This box enables infinitely
variable speed setting directly
at the inverter. 1 switch left-o-right
Potentiometer0 ... 100 %
Profibus module
SK TU2-PBR
This interfaces enable control
of the NORDAC trio SK300E
via the serial Profibus port. 1 Profibus- Interface
2x 5 pole M12 system plug
Profibus module
SK TU2-PBR-KL
This interfaces enable control
of the NORDAC trio SK300E
via the serial Profibus port. 1 Profibus- Interface
1x 8 pole plug
1x SUB-D9
Profibus DP
SK TU2-PBR-24V
This interfaces enable control
of the NORDAC trio SK300E
via the serial Profibus port. By
external 24V supply the bus
partner is contacted still,
although the supply voltage of
inverter itself is switched off. 1 Profibus- Interface
2x 5 pole M12 system plug
1 external 24V voltage supply
CANbus
SK TU2-CAO
This interfaces enable control
of the NORDAC trio SK300E
via the serial CANopen port. 1 CANopen- Interface
2x 5 pole M12 system plug
DeviceNet
SK TU2-DEV
This interfaces enable control
of the NORDAC trio SK300E
via the serial DeviceNet port. 1 DeviceNet- Interface
1x 5 poliger M12 system plug
InterBus
SK TU2-IBS
This interfaces enable control
of the NORDAC trio SK300E
via the serial Interbus port. 1 InterBus- Interface
2x 5 poliger M12 system plug
1 externe 24V voltage supply
AS-Interface
SK TU2-AS1
This interfaces enable sensors
and cctors. Additionally the
parameter setting of 300E is
possible via Asi-Interface. 2x 5 pole M12 system plug for actor and
sensor
1x 5 pole M12 system plug for AS-
Interface and 24V auxilary voltage