NORD Drivesystems BU0000 - Manual (Page 67)

Messages
67 BU 0000 GB
No Description
202 First close old serial port!
203 Serial port is not open!
204 The settings of the communication module could not be set. Examine whether the current baud rate
are supported.
205 Buffer setup impossible!
206 Timeout setup impossible!
207 Communication not possible!
208 Internal object error!
210 Error writing file!
211 Telegramm not created!
212 No high-resolution Timer found!
213 No device found!
214 Only with 16 Bit SetPoint!
215 Inverter is running. Close ?
216 The firmware update can only be executed if the device address is zero!
217 The firmware update tool could not be started! Please install NORD CON again, in order to repair
the problem.
218 Please add a communication module!
219 Do you want to import the file into online view?
220 Here no device can be added!
221 Were found more to than 1 device at the bus! An update could cause problems. Would you like to
continue?
222 It comes to the inconsistency of the control data, if you use macros and control windows
simultaneously! Please close all control windows or the macro editor.
223 The transfer cannot be started, because the parameter editor is opened! Please close the editor
and restart the function.
224 The on-line help could not be found! Please install NORD CON again, in order to repair the
problem.
225 The device cannot be disconnected, because still at least one window of the device is opened.
226 The file cannot be opened. The format of the file is unknown.
227 The file could not be read!
228 The format of the file is unknown!
229 The file was changed by the user!
230 The action cannot be executed, because the device is not connected!
231 The settings were changed. Would you like to store the changes?
232 Their computer does not support Chinese characters, therefore representation error can occur!
233 The value cannot be converted into INT16!
234 The current version of the device does not support a firmware update over the system bus!
235 The current version of the technology box does not support a firmware update over the system bus!
236 The device at address 0 doesn't support a firmware update over the system bus!
300 The path for the internal database have got to correct!
301 The path for the internal database is not correct. NORD CON will abort.
302 Error while open database!
303 FU-Type in database is not compatible!
304 FU-Type in database is different!
305 Save actual database?
306 Cannot open database!
307 Unallowed folder!