FUTEK VCal Sensor Verification - Manual (Page 54)

Futek Advanced Sensor Technology – Futek VCal™Documentation Rev. 1.8.0 07/26/05
©Futek Advanced Sensor Technology 2005 54
Instructions For Printing A Repeatability Report
The instructions for printing a Repeatability Report are identical to those for printing a Certificate with the following exceptions:
1. You must check the Repeatability Report Box; (on the Print options screen
pg. 51 )
2. Enter the sensor serial number and press’ Enter ‘; (Under Search on the Print Options screen pg. 51 )
3. Choose the correct Channel and Direction information;
4. You must choose exactly three identical tests to compare for repeatability (same sensor, direction, load points, etc.), by double
clicking on them from the list of available tests, and then press
Print .
The following pages show an example of a Standard Mode Repeatability Report....
Final Test Results
Calibration Closing/
Disclaimer State-
ments
Company /
Calibration Lab
Information
Standard Mode Calibration Certificate (pg. 2)