FUTEK VCal Sensor Verification User Manual

Page 23

Futek Advanced Sensor Technology – Futek VCal™Documentation

Rev. 1.8.0

07/26/05

©Futek Advanced Sensor Technology 2005

RS - 232 Channel

This option allows you to access the RS - 232 channel, where you can then connect ASCII devices to your VCal™

system, such as the Futek D502, D506, and D526 . . .

COM -

Allows you to designate which

communication port

you wish to use (COM’s 1 – 16 are available).

Baud -

Allows you to designate the

baud rate

you wish to use (300 – 115200 are available).

Parity -

Allows you to choose between

Non, Odd,

Even parity

checking.

Char –

Allows the user to choose between 7 or 8

character.

Stop Bit -

Allows you to choose either 1 or 2 as your

stop bit.

Handshaking -

Allows you to choose between

None

XonXoff

RTS

, and

RTSXonXoff

as your handshake method.

Termination Characters -

Allows you to define

termination characters

for strings received from, or transmitted to the device.

RX Data Command -

Allows you to define data

commands received

from the device.

Profile -

Allows you to enter and save commonly used

profiles

, so that they may be easily used later.

Misc. Commands -

Allows you to define commonly used

commands

that are transmitted to the device.