Technical data – KROHNE IFC 050 Converter EN User Manual

Page 72

TECHNICAL DATA

IFC 050

www.krohne.com

08/2013 - 4002184002 - MA IFC 050 R02 en

Display and user interface

Graphic display

LC display

Size: 128 x 64 pixels, corresponds to 59 x 31 mm = 2.32" x 1.22"

Ambient temperatures below -25°C / -13°F may affect the readability of the display.

Operating elements

4 push buttons for operating the signal converter when the housing is open.

4 magnet keys for operating the signal converter when the housing is closed.

Remote control

Only generic and not device-specific DDs and DTMs available!

PACTware

(including Device Type Manager (DTM))

HART

Hand Held Communicator from Emerson Process

AMS

from Emerson Process

PDM

from Siemens

All DTMs and drivers are available free of charge from the manufacturer's website.

Display functions

Operating menu

Setting the parameters using 2 measuring pages, 1 status page, 1 graphic page

(measured values and graphics are freely adjustable)

Language display texts (as

language package)

Standard: English, French, German, Dutch, Portuguese, Swedish, Spanish, Italian

Eastern Europe: English, Slovenian, Czech, Hungarian

Northern Europe: English, Danish, Polish, Finnish

Southern Europe: English, Turkish

China: English, German, Chinese

Russia: English, German, Russian

Units

Metric, British and US units selectable as required from lists for volume / mass flow

and counting, flow velocity, electrical conductivity, temperature

Measuring accuracy

Reference conditions

Medium: water

Temperature: +20°C / +68°F

Pressure: 1 bar / 14.5 psi

Inlet section: ≥ 5 DN

Maximum measuring error

0.5% of the measured value above 0.5 m/s; depending on the measuring sensor

2.5 mm/s below 0.5 m/s; independent of the measuring sensor

For detailed information and accuracy curves, refer to chapter "Accuracy".

Current output electronics: ±10 µA; ±100 ppm/°C (typically: ±30 ppm/°C)

Repeatability

0.1%