KROHNE IFC 050 Converter EN - Manual (Page 30)

4
ELECTRICAL CONNECTIONS
30
IFC 050
www.krohne.com 08/2013 - 4002184002 - MA IFC 050 R02 en
• To open the cover of the electrical terminal compartment, lightly press in the side walls of the
mains cover 2.
• Flip the mains cover up.
• Connect the power supply.
• Close the mains cover again by flipping it down.
100...230 VAC (tolerance range: -15% / +10%) 100...230 VAC (tolerance range: -15% / +10%) 100...230 VAC (tolerance range: -15% / +10%) 100...230 VAC (tolerance range: -15% / +10%)
• Note the power supply voltage and frequency (50...60 Hz) on the nameplate.
24 VDC (tolerance range: -30% / +30%) 24 VDC (tolerance range: -30% / +30%) 24 VDC (tolerance range: -30% / +30%) 24 VDC (tolerance range: -30% / +30%)
• Note the data on the nameplate!
• When connecting to functional extra-low voltages, provide a facility for protective separation
(PELV) (acc. to VDE 0100 / VDE 0106 and/or IEC 364 / IEC 536 or relevant national
regulations).
Figure 4-9: Terminal compartment for power
1 Cable entry for power supply
2 Mains cover
3 Ground terminal
4 100...230 VAC (-15% / +10%)
5 24 VDC (-30% /+30%)
INFORMATION!
240 VAC + 5% is included in the tolerance range.