KROHNE IFC 050 Converter EN - Manual (Page 44)

6
OPERATION
44
IFC 050
www.krohne.com 08/2013 - 4002184002 - MA IFC 050 R02 en
6.1 Safety instructions for the use of the bar magnet
To operate the signal converter when the housing is closed, 4 magnetic keys are available. They
are activated by a bar magnet.
6.2 Display and operating elements
WARNING!
The bar magnet can be dangerous for people with cardiac pacemakers or other metal implants.
Make sure that these people do not use the bar magnet or meet minimum clearances! Observe
the relevant national and local regulations and requirements!
Figure 6-1: Display and operating elements (Example: flow indication with 2 measuring values)
1 Indicates a possible status message in the status list
2 Tag number (is only indicated if this number was entered previously by the operator)
3 Indicates when a key has been pressed
4 1st measured variable in large representation
5 Bargraph indication
6 Push buttons for operation with open housing (see table below for function and representation in text)
7 Magnet keys for operation with closed housing (see table below for function and representation in text)
INFORMATION!
• After 5 minutes of inactivity, there is an automatic return to measuring mode. Previously
changed data is not saved.