KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 72)

6
OPERATION
72
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
5 Service These settings are specific for the
ultrasonic measurement operation.
Changing service settings may affect proper
operation of the instrument. It is advised
that changing of these parameters is
performed by qualified engineers only.
1 Signal data
1 Signal path 1 Selection from list
2 Signal path 2 Selection from list
3 Window path 1
1 Method Selection from list
2 Window size
3 Window weight
4 Window minimum
5 Window start
6 Window end
4 Window path 2 Same as "Window path 1"
5 Detection path 1
1 Method Selection from list
2 Trigger level
3 Trigger margin
4 Dead time
6 Detection path 2 Same as "Detection path 1"
2 Service calibration
1 zero device
1 path 1
2 path 2
2 zero converter
1 path 1
2 path 2
3 Reset to defaults Selection from list
Menu number Menu item Remarks