KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 26)

3
INSTALLATION FOR FLOW MEASUREMENT
26
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
3.4.1 2 or 4 traverses with 1 rail
Applicable diameters with one rail:
Put the first transducer at position "0". Put the other transducer at the advised distance, shown
on the screen in Step 2. See the figures below.
• Unlock the transducer by turning the locking knob 2 counter clockwise.
• Slide the transducer 1 to the new position 3.
• Lock the transducer by turning the locking knob 2 clockwise.
Number of
traverses Diameter range
2 DN15...250
4 DN15...150
Figure 3-11: Advised distance with one rail
1 Advised distance is measured from center first transducer to indicator at second transducer.