KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 20)

3
INSTALLATION FOR FLOW MEASUREMENT
20
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
• Choose the desired configuration.
• In the next screen, fill in the data that was found in Step 1.
Figure 3-9: System configuration possibilities
1 1 pipe / 1 path
2 1 pipe / 2 path
3 2 pipes
1.2
Pipe tag
Outer diameter
Material
Wall thickness
Liner material
Liner thickness
< Previous | Next > < Previous | Next > < Previous | Next > < Previous | Next >
Pipe1
100.00 mm
Carbon steel
5.00 mm
Epoxy
0.50 mm
13-04-2010 14:11:09 13 MB free
Pipe tag Enter a name for the pipe
Press again "" and "".
Outer diameter
Use the outside diameter
Material Choose the right material
Wall thickness Fill in the pipe wall thickness
Liner material Select whether there is a liner or not
Liner thickness Fill in the liner thickness
The liner thickness will only be shown if a liner
material is chosen.
Choose next