KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 59)

OPERATION
6
59
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
6.4 How to transfer data to a PC
6.4.1 Site files
Site files are used to save and load all configured data from different applications / sites. At the
startup of the converter, the site file is loaded that was last used. If no site file is present, the
default site file will be used.
Site files can be saved and loaded in the "Measurement" menu. When a parameter setting is
changed, the converter will ask if you want to save it when you enter the measuring mode.
In the menu "File management Site files" you can manage your site files. You can copy,
rename or delete site files.
With the "Import" or "Export" option you can copy site files from/to a memory stick connected to
the USB port.
It is highly recommended to backup your site files on a memory stick or on your pc.
The site files are XML files. You can store, copy or rename the site files on your pc, however if you
edit a site file on your pc the site file might not have the correct format anymore and may give an
error when reading it on the converter.
By saving the default site file the parameters settings of the factory are overwritten. To restore
the factory default settings, select "Settings and information Load factory settings". If the
default site file is deleted the converter will create a new one at the next startup of the device.
CAUTION!
Make sure that site files have a valid name: minimum one character, maximum 12 characters
and underscores (_) are not allowed.
File management Site files
Import
Rename
Copy
Export
Delete
13-04-2010 14:11:09 13 MB free