KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
1.1 Intended use
The OPTISONIC 6300 P OPTISONIC 6300 P OPTISONIC 6300 P OPTISONIC 6300 P portable clamp-on flow meter is designed for measurement of liquid
flows in full pipes, datalogging and transfer of logged results to the PC. The portable clamp-on
flow meter makes it possible to measure the flow on places temporary or you can make use of it
if you want to compare the output with other measurement devices.
If an inline measurement device is broken and you are in need of the information the OPTISONIC
6300 P might be the solution for you.
1.2 Certification
In accordance with the commitment to customer service and safety, the device
described in this document meets the following safety requirements:
• EMC Directive 2004/108/EC and 93/68/EEC in conjunction with EN 61326-1 (1997) and
A1 (1998), A2 (2001)
• Low-Voltage Directives 73/23/EEC and 93/68/EEC in conjunction with EN 61010-1 (2001)
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.