GW Instek PCS-1000 - Manual (Page 84)

PCS-1000 User Manual
84
Query Example *STB?
>4
Indicates that there is a message in the error queue.
*PSC
Set
Query
Description The Power on Status Clear command enables the
unit to clear the Service Request Enable, the
Standard Event Enable and other event enable
registers at power up.
Syntax *PSC (0|1)
Query Syntax *PSC?
Parameter /
Return Parameter 0 Disabled
1 Enabled
Query Example *PSC 0
Disables the clearing of the event registers at power
up.
*OPC
Set
Query
Description The Operation Complete command will set bit 0 of
the Standard Event Register when all pending
operations are complete. The OPC? query will
return 1 when all pending operations are complete.
Syntax *OPC
Query Syntax *OPC?
Return Parameter 1 Enabled
Query Example *OPC?
>1
Indicates that all pending operations are complete.