GW Instek PCS-1000 - Manual (Page 41)

OPERATION
41
Beeper Settings
Background The beeper sound that is used for key presses
and other system sounds can be turned on or
off using this menu.
Range On, Off
Steps 1. Long push the Func key.
The function menu will appear.
2. Use the ◄ Func ► keys to navigate to the
BEEPER menu.
3. Use the ▼Select ▲ keys to the beeper on or off.
Press the Enter key to set the mode.
By default the beeper sound is turned on.
4. Use the ◄ Func ► keys to navigate to the
SAVE FUNC SET menu item. Press the Enter
key to save.
Note
To exit without saving, navigate to the EXIT FUNC
SET menu using the ◄ Func ► keys and press the
Enter key to exit without saving any settings.