GW Instek PCS-1000 - Manual (Page 39)

OPERATION
39
Setting the Averaging Number for the DCV/ACV/DCA/ACA
Background Each of the different measurement modes
(DCV, ACV, DCA, ACA) can have the number
of averages set individually.
Range 01 ~ 10, 20, 30, 40, 50, 60, 70, 80, 90,
100
Steps 1. Long push the Func key.
The function menu will appear.
2. Use the ◄ Func ► keys to navigate to the DCV
AVG, ACV AVG, DCA AVG or ACA AVG
menu.
3. Use the ▼Select ▲ keys to select the number of
averages for the selected mode. Press the Enter
key to set the mode.
By default the number of averages is 10.
4. Use the ◄ Func ► keys to navigate to the
SAVE FUNC SET menu item. Press the Enter
key to save.
Note
To exit without saving, navigate to the EXIT FUNC
SET menu using the ◄ Func ► keys and press the
Enter key to exit without saving any settings.