GW Instek PCS-1000 - Manual (Page 37)

OPERATION
37
Setting the AD Speed
Background The ADC IC speed has a number of settings.
The higher the setting, the lower the accuracy
and resolution of the meter.
Range: Seconds (resolution):
7 (6½ digits), 30 (5½ digits),
100 (4½ digits)
Steps 1. Long push the Func key.
The function menu will appear.
2. Use the ◄ Func ► keys to navigate to the AD
SPEED menu.
3. Use the ▼Select ▲ keys to select the AD speed.
Press the Enter key to set the speed.
By default the AD Speed is set to 7 (6½ digits).
4. Use the ◄ Func ► keys to navigate to the
SAVE FUNC SET menu item. Press the Enter
key to save.
Note
To exit without saving, navigate to the EXIT FUNC
SET menu using the ◄ Func ► keys and press the
Enter key to exit without saving any settings.