GW Instek PCS-1000 - Manual (Page 22)

PCS-1000 User Manual
22
Input Terminals
Background There are 3 terminals for the 300A, 30A and
3A/300mA/30mA ranges, respectively.
The 300A range uses the rear panel terminals
and uses M8 crimped terminal cables.
The 30A range uses the 30A terminal and uses
M4 sized crimped terminal cables or banana
plugs.
The 3A input terminal uses standard banana
plugs (GW Instek part number GTL-105A). The
3A terminal supports 3A, 30mA and 300mA
ranges.
WARNING Ensure any current or voltage sources are disabled
before connecting any cables to the PCS-1000.
Steps 1. Turn the power switch off.
POWER
2. Connect the PCS-1000 in series
with the load and source. The
current monitor output can be
used in conjunction with a voltage
meter.
Page 20
WARNING:
Do not short the positive or negative 3A, 30A and
300A terminals.