GW Instek PCS-1000 - Manual (Page 62)

PCS-1000 User Manual
62
CONFigure:CURRent
Query
Description The CONFigure:CURRent query will return the
current range unit.
Query Syntax CONFigure:CURRent?
Return Parameter Returns the current mode and range unit.
Query Example CONF:CURR?
> “DC 0.01”
Note
The range that is returned is the base unit. See the
table below:
Unit Current Range
100 300A
10 30A
1 3A
0.1 300mA
0.01 30mA
CONFigure:CURRent[:DC]
Set
Description This command will set the current mode to DC
and set the range. If the range is not specified, then
it will not change.
Syntax CONFigure:CURRent[:DC] [ | AUTO]
Parameter Current range : 0.00000001~305
The unit will automatically be set to the
closest range.
AUTO Autorange; Only applicable for the ≤3A
ranges.
Autorange is not supported for the 30A
and 300A ranges.