GW Instek PCS-1000 - Manual (Page 69)

COMMUNICATION INTERFACE
69
Sense Commands
[SENSe:]CURRent:RANGe .......................................... 69
[SENSe:]CURRent:DC:AVERage:COUNt .................... 70
[SENSe:]CURRent:AC:AVERage:COUNt .................... 70
[SENSe:]VOLTage:RANGe .......................................... 70
[SENSe:]VOLTage:DC:AVERage:COUNt .................... 71
[SENSe:]VOLTage:AC:AVERage:COUNt .................... 72
[SENSe:]CURRent:RANGe
Set
Query
Description Sets or queries the current range.
Syntax
Query Syntax [SENSe:]CURRent:RANGe {|AUTO}
[SENSe:]CURRent:RANGe?
Parameter /
Return Parameter Current range : 0.00000001～305
Sets the current range in amps. The unit
will automatically choose the closest
range that is programmed.
AUTO Sets the range to AUTO; Only applicable
for the ≤3A ranges.
Autorange is not supported for the 30A
and 300A ranges.
Example CURR:RANG AUTO
Sets the current range to AUTO.
Note
The range that is returned is the base unit. See the
table below:
Unit Current Range
100 300A
10 30A
1 3A
.1 300mA
.01 30mA