GW Instek PCS-1000 - Manual (Page 65)

COMMUNICATION INTERFACE
65
CONFigure:VOLTage:AC
Set
Description This command will set the voltage mode to AC
and set the ACV range. If the range is not specified
then it will not be changed.
Syntax CONFigure:VOLTage:AC [ | AUTO]
Parameter Voltage range : 0.0000001~630
The unit will automatically be set to the
closest range.
AUTO Autoset
Example CONF:VOLT:AC 20
Sets the voltage mode to AC and the ACV range to
20V.
Example CONF:VOLT:AC
Sets the voltage mode to AC. The range stays the
same.
CONFigure:AVERage:MODE
Set
Query
Description This command will set or query the average mode.
Syntax
Query Syntax CONFigure:AVERage:MODE {0|1,TOTAL|SHIFT}
CONFigure:AVERage:MODE?
Parameter
0, TOTAL Total mode
1, SHIFT Shift mode
Return Parameter Total Total mode
Shift Shift mode
Example CONF:AVER:MODE 0
Sets the average mode to Total mode.